MACHINIST X99 RS9 Motherboard M-ATX Intel LGA 2011-3 Board with Xeon E5 V3/V4 DDR4 RAM

$144.99 USD

Bundle X99 RS9+E5 2650 V4 X99 RS9+E5 2650 V4+8GB DDR4 2133 X99 RS9+E5 2650 V4+2*8GB DDR4 2133 X99 RS9+E5 2680 V4 X99 RS9+E5 2680 V4+8GB DDR4 2133 X99 RS9+E5 2680 V4+2*8GB DDR4 2133

LGA 2011-3 Socket: The X99 server motherboard supports Intel Xeon E5 V3/V4 series processors and Core i7 5th/6th gen processors.
4-Channel DDR4 Slots: Compatible with ECC, RECC and non-ECC DDR4 memory, the maximum capacity is 8*32GB, and supports 2133/2400MHz. (Server memory and desktop memory cannot be used together).
High-speed M.2 Slots: This LGA2011-v3 motherboard is equipped with two NVME M.2 (PCIe 3.0 X4 bandwidth) slots, maximum speed Up to 3600M/S.
PCIe Expansion Slots: Equipped with 1 * PCIe 3.0 X16 slots and 2 * PCIe 2.0 X1 slots. Each lane can support a rate of 8Gbps, and the rate of the X16 slot can reach 128Gbps.
IMPORTANT: The package does not contain a user manual and CMOS CR2032 battery.
If you purchase a kit that includes memory: The memory in the kit is DDR4 8GB 2133 MHz desktop memory.

FAQs

You can download the driver through one of the following links:
https://www.drivethelife.com/
https://www.drivermax.com/

1. Some motherboards won't boot after removing the CMOS battery. Reinstall the CMOS battery and discharge it (clear CMOS) to resolve.
2. Ask the customer for their CPU model to verify compatibility.
3. Verify power connections: Ensure the motherboard power connector and CPU power connector are securely seated. Check if the case power switch is turned on.
4. Confirm the case power-on cable is properly connected.
5. Test with a known-good power supply to isolate potential issues.
6. Remove all peripherals (graphics card, hard drives, USB devices, etc.) before powering on. (For troubleshooting the case switch, directly short the switch pins with a metal object to bypass the switch mechanism.)
7. Replace the CPU.

1. Reset BIOS/CMOS
2. Verify motherboard power supply and CPU power connector are properly seated
3. Check memory compatibility and correct installation position
4. Verify CPU compatibility
5. Replace CPU to determine if it is faulty
6. Replace memory to determine if it is faulty

1. Verify monitor is powered on
2. Ensure display cable is securely connected (DP, HDMI, DVI, VGA)
3. If using integrated graphics (no discrete GPU installed), confirm CPU includes integrated graphics (e.g., CPUs with “F” suffix or Intel Xeon series lack integrated graphics; discrete GPU required for normal operation)
4. Verify the display cable is connected to the correct port: plug into the motherboard display port if no discrete GPU is installed; connect to the GPU's display port if a discrete GPU is present.
5. Replace the display cable to rule out cable issues.
6. Replace the graphics card to determine if the monitor is functioning properly.

1. Reset the BIOS/CMOS.
2. Verify CPU compatibility and ensure the CPU is functioning properly.
3. Check memory compatibility and confirm the memory is operating correctly.
4. Disconnect the graphics card, hard drive, USB devices, and other peripherals. Power on the system to see if the issue persists.

1. Verify proper cooling: Ensure the CPU cooler fan is spinning, the cooler base is tightly seated against the CPU, and thermal paste is applied.
2. Replace the CPU.
3. Replace the memory.
4. Replace the hard drive.
5. Replace the operating system.
6. Replace the power supply.